Biomaterials and Biomimetics

Research Output

Filter
Article
Article

Influence of clinically relevant factors on the immediate biomechanical surrounding for a series of dental implant designs

Shunmugasamy, V. C., Gupta, N., Pessoa, R. S., Janal, M. N. & Coelho, P. G., Feb 7 2011, In : Journal of Biomechanical Engineering. 133, 3, 031005.

Research output: Contribution to journalArticle

Influence of estrogen deficiency on bone around osseointegrated dental implants: An experimental study in the rat jaw model

Giro, G., Coelho, P. G., Sales-Pessoa, R., Rodrigues Pereira, R. M., Kawai, T. & Perez Orrico, S. R., Jul 2011, In : Journal of Oral and Maxillofacial Surgery. 69, 7, p. 1911-1918 8 p.

Research output: Contribution to journalArticle

Influence of implant design on the biomechanical environment of immediately placed implants: Computed tomography-based nonlinear three-dimensional finite element analysis

Pessoa, R. S., Coelho, P. G., Muraru, L., Marcantonio, E., Vaz, L. G., Vander Sloten, J. & Jaecques, S. V. N., 2011, In : International Journal of Oral and Maxillofacial Implants. 26, 6, p. 1279-1287 9 p.

Research output: Contribution to journalArticle

Influence of implant shape, surface morphology, surgical technique and bone quality on the primary stability of dental implants

Eliasa, C. N., Rocha, F. A., Nascimento, A. L. & Coelho, P. G., 2012, In : Journal of the Mechanical Behavior of Biomedical Materials. 16, 1, p. 169-180 12 p.

Research output: Contribution to journalArticle

Influence of interlayer design on residual thermal stresses in trilayered and graded all-ceramic restorations

Henriques, B., Fabris, D., Souza, J. C. M., Silva, F. S., Mesquita-Guimarães, J., Zhang, Y. & Fredel, M., Feb 1 2017, In : Materials Science and Engineering C. 71, p. 1037-1045 9 p.

Research output: Contribution to journalArticle

Influence of microstructure on the erosive wear behavior of Ca α-sialon materials

Zhang, Y., Cheng, Y. B. & Lathabai, S., Nov 2001, In : Journal of the European Ceramic Society. 21, 13, p. 2435-2445 11 p.

Research output: Contribution to journalArticle

Influence of microstructure on the erosive wear behaviour of Ca alpha-sialon materials

Zhang, Y., Cheng, YB. & Lathabai, S., Nov 2001, In : Journal of the European Ceramic Society. 21, 13, p. 2435-2445

Research output: Contribution to journalArticle

Influence of placement depth on bone remodeling around tapered internal connection implants: A histologic study in dogs

Huang, B., Meng, H., Zhu, W., Witek, L., Tovar, N. & Coelho, P. G., Aug 1 2015, In : Clinical Oral Implants Research. 26, 8, p. 942-949 8 p.

Research output: Contribution to journalArticle

Influence of platform diameter in the reliability and failure mode of extra-short dental implants

Bordin, D., Bergamo, E. T. P., Bonfante, E. A., Fardin, V. P. & Coelho, P. G., Jan 2018, In : Journal of the Mechanical Behavior of Biomedical Materials. 77, p. 470-474 5 p.

Research output: Contribution to journalArticle

Influence of polishing system on the surface roughness of flowable and regular-viscosity bulk fill composites

Rigo, L. C., Bordin, D., Fardin, V. P., Coelho, P. G., Bromage, T. G., Reis, A. & Hirata, R., 2018, In : International Journal of Periodontics and Restorative Dentistry. 38, 4, p. e79-e86

Research output: Contribution to journalArticle

Influence of preparation design and ceramic thicknesses on fracture resistance and failure modes of premolar partial coverage restorations

Guess, P. C., Schultheis, S., Wolkewitz, M., Zhang, Y. & Strub, J. R., Oct 2013, In : Journal of Prosthetic Dentistry. 110, 4, p. 264-273 10 p.

Research output: Contribution to journalArticle

Influence of residual thermal stresses on the edge chipping resistance of PFM and veneered zirconia structures: Experimental and FEA study

Tanaka, C. B., Ballester, R. Y., De Souza, G. M., Zhang, Y. & Meira, J. B. C., Feb 2019, In : Dental Materials. 35, 2, p. 344-355 12 p.

Research output: Contribution to journalArticle

Influence of scaffold meso-scale features on bone tissue response

Rekow, D., Van Thompson, P. & Ricci, J. L., Aug 2006, In : Journal of Materials Science. 41, 16, p. 5113-5121 9 p.

Research output: Contribution to journalArticle

Infrared and computational studies of spontaneously adsorbed amine reagents on YBa2Cu3O7: Structural characterization of monolayers atop anisotropic superconductor surfaces

Ritchie, J. E., Wells, C. A., Zhou, J. P., Zhao, J., McDevitt, J. T., Ankrum, C. R., Jean, L. & Kanis, D. R., Apr 1 1998, In : Journal of the American Chemical Society. 120, 12, p. 2733-2745 13 p.

Research output: Contribution to journalArticle

In-house manufacture of sterilizable, scaled, patient-specific 3D-printed models for rhinoplasty

Bekisz, J. M., Liss, H. A., Maliha, S. G., Witek, L., Coelho, P. G. & Flores, R. L., Feb 15 2019, In : Aesthetic Surgery Journal. 39, 3, p. 254-263 10 p.

Research output: Contribution to journalArticle

Open Access

In Silico Analysis of the Biomechanical Stability of Commercially Pure Ti and Ti-15Mo Plates for the Treatment of Mandibular Angle Fracture

Yamaguchi, S., Anchieta, R. B., Guastaldi, F. P. S., Tovar, N., Tawara, D., Imazato, S. & Coelho, P. G., May 2017, In : Journal of Oral and Maxillofacial Surgery. 75, 5, p. 1004.e1-1004.e9

Research output: Contribution to journalArticle

In-situ hardening hydroxyapatite-based scaffold for bone repair

Zhang, Y., Xu, H. H. K., Takagi, S. & Chow, L. C., May 2006, In : Journal of Materials Science: Materials in Medicine. 17, 5, p. 437-445 9 p.

Research output: Contribution to journalArticle

Integration of semiconductor quantum dots into nano-bio-chip systems for enumeration of CD4+ T cell counts at the point-of-need

Jokerst, J. V., Floriano, P. N., Christodoulides, N., Simmons, G. W. & McDevitt, J. T., 2008, In : Lab on a Chip. 8, 12, p. 2079-2090 12 p.

Research output: Contribution to journalArticle

Interactions between MC3T3-E1 cells and textured Ti6Al4V surfaces

Soboyejo, W. O., Nemetski, B., Allameh, S., Marcantonio, N., Mercer, C. & Ricci, J., 2002, In : Journal of Biomedical Materials Research. 62, 1, p. 56-72 17 p.

Research output: Contribution to journalArticle

Interobserver agreement in dysplasia grading: Toward an enhanced gold standard for clinical pathology trials

Speight, P. M., Abram, T. J., Floriano, P. N., James, R., Vick, J., Thornhill, M. H., Murdoch, C., Freeman, C., Hegarty, A. M., D'Apice, K., Kerr, A. R., Phelan, J., Corby, P., Khouly, I., Vigneswaran, N., Bouquot, J., Demian, N. M., Weinstock, Y. E., Redding, S. W., Rowan, S. & 4 others, Yeh, C. K., McGuff, H. S., Miller, F. R. & McDevitt, J. T., Oct 1 2015, In : Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology. 120, 4, p. 474-482.e2

Research output: Contribution to journalArticle

Interval cranioplasty: Comparison of current standards

Sultan, S. M., Davidson, E. H., Butala, P., Schachar, J. S., Witek, L., Szpalski, C., Ricci, J. L., Saadeh, P. B. & Warren, S. M., May 2011, In : Plastic and reconstructive surgery. 127, 5, p. 1855-1864 10 p.

Research output: Contribution to journalArticle

Intracortical remodeling and growth of the macaque mandible

Bromage, T. & Boyde, A., 1998, In : Scanning. 20, p. 240

Research output: Contribution to journalArticle

Intrapopulation variability in mineralization density at the human femoral mid-shaft

Goldman, H. M., Bromage, T. G., Boyde, A., Thomas, C. D. L. & Clement, J. G., Aug 1 2003, In : Journal of Anatomy. 203, 2, p. 243-255 13 p.

Research output: Contribution to journalArticle

Intra- versus intergranular low-field magnetoresistance of Sr2FeMoO6 thin films

Yin, H. Q., Zhou, J. S., Zhou, J. P., Dass, R., McDevitt, J. T. & Goodenough, J. B., Nov 1 1999, In : Applied Physics Letters. 75, 18, p. 2812-2814 3 p.

Research output: Contribution to journalArticle

Inverse correlations between wear and mechanical properties in biphasic dental materials with ceramic constituents

Borrero-Lopez, O., Guiberteau, F., Zhang, Y. & Lawn, B. R., May 2020, In : Journal of the Mechanical Behavior of Biomedical Materials. 105, 103722.

Research output: Contribution to journalArticle

In vitro and in vivo biocompatibility of ReOss® in powder and putty configurations

Pintor, A. V. B., Resende, R. F. D. B., Neves, A. T. N., Alves, G. G., Coelho, P. G., Granjeiro, J. M. & Calasans-Maia, M. D., Mar 1 2018, In : Brazilian Dental Journal. 29, 2, p. 117-127 11 p.

Research output: Contribution to journalArticle

In vitro characterization / degradation of two bioglasses used as synthetic alloplasts for bone grafting

Coimbra, M. E. R., Elias, C. N. & Coelho, P. G., 2009, In : Key Engineering Materials. 396-398, p. 23-26 4 p.

Research output: Contribution to journalArticle

In vitro characterization of a calcium sulfate/PLLA composite for use as a bone graft material

Mamidwar, S. S., Arena, C., Kelly, S., Alexander, H. & Ricci, J., Apr 2007, In : Journal of Biomedical Materials Research - Part B Applied Biomaterials. 81, 1, p. 57-65 9 p.

Research output: Contribution to journalArticle

In vitro degradation of poly-L-D-lactic acid (PLDLA) pellets and powder used as synthetic alloplasts for bone grafting

Coimbra, M. E. R., Elias, C. N. & Coelho, P. G., Oct 2008, In : Journal of Materials Science: Materials in Medicine. 19, 10, p. 3227-3234 8 p.

Research output: Contribution to journalArticle

In vitro degradation of poly-L-DL-lactic acid (PLDLLA) after two processing methods

Coimbra, M. E. R., Bernardes, M. G., Elias, C. N. & Coelho, P., 2014, In : Journal of Biomimetics, Biomaterials and Biomedical Engineering. 20, p. 45-64

Research output: Contribution to journalArticle

In vitro evaluation of the implant abutment connection sealing capability of different implant systems

Coelho, P. G., Sudack, P., Suzuki, M., Kurtz, K. S., Romanos, G. E. & Silva, N. R. F. A., Dec 2008, In : Journal of oral rehabilitation. 35, 12, p. 917-924 8 p.

Research output: Contribution to journalArticle

In vitro fatigue tests and in silico finite element analysis of dental implants with different fixture/abutment joint types using computer-aided design models

Yamaguchi, S., Yamanishi, Y., Machado, L. S., Matsumoto, S., Tovar, N., Coelho, P. G., Thompson, V. P. & Imazato, S., Jan 2018, In : Journal of Prosthodontic Research. 62, 1, p. 24-30 7 p.

Research output: Contribution to journalArticle

In vitro shear bond strength of 2 resin cements to zirconia and lithium disilicate: An in vitro study

Woo, E. S., Goldstein, G., Choi, M. & Bromage, T. G., 2020, (Accepted/In press) In : Journal of Prosthetic Dentistry.

Research output: Contribution to journalArticle

In vitro taste sensors: Technology and applications

Roy, G. & McDevitt, J. T., 2002, In : ACS Symposium Series. 825, p. 262-275 14 p.

Research output: Contribution to journalArticle

In vitro tendon cell colony growth rates on synthetic fibers

Ricci, J., Alexander, H., Gona, A. G. & Lelah, MD., 1990, In : Journal of Biomedical Materials Research - Part B Applied Biomaterials. 1, 2, p. 103-110

Research output: Contribution to journalArticle

In vitro tendon cell growth rates on a synthetic fiber scaffold material and on standard culture plates

Ricci, J. L., Gona, A. G. & Alexander, H., May 1991, In : Journal of Biomedical Materials Research. 25, 5, p. 651-666 16 p.

Research output: Contribution to journalArticle

In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing

Simon, J. L., Michna, S., Lewis, J. A., Rekow, E. D., Thompson, V. P., Smay, J. E., Yampolsky, A., Parsons, J. R. & Ricci, J. L., Nov 1 2007, In : Journal of Biomedical Materials Research - Part A. 83, 3, p. 747-758 12 p.

Research output: Contribution to journalArticle

In vivo bone response to calcium sulfate/poly L-lactic acid composite

Mamidwar, S., Weiner, M., Alexander, H. & Ricci, J., Jun 2008, In : Implant dentistry. 17, 2, p. 208-216 9 p.

Research output: Contribution to journalArticle

In vivo efficacy of calcium phosphate-based synthetic-bone-mineral on bone loss resulting from estrogen and mineral deficiencies

Srinivasan, K., Mijares, D. Q., Janal, M. N., Aranya, A. K., Zhang, D. S., LeGeros, R. Z. & Zhang, Y., Jul 1 2020, In : Journal of Biomedical Materials Research - Part B Applied Biomaterials. 108, 5, p. 1868-1878 11 p.

Research output: Contribution to journalArticle

In vivo evaluation of a biomimetic apatite coating grown on titanium surfaces

Vasudev, D. V., Ricci, J. L., Sabatino, C., Li, P. & Parsons, J. R., Jun 15 2004, In : Journal of Biomedical Materials Research - Part A. 69, 4, p. 629-636 8 p.

Research output: Contribution to journalArticle

In Vivo Evaluation of a Novel Implant Coating Agent: Laminin-1

Bougas, K., Jimbo, R., Vandeweghe, S., Tovar, N., Baldassarri, M., Alenezi, A., Janal, M., Coelho, P. G. & Wennerberg, A., Oct 1 2014, In : Clinical Implant Dentistry and Related Research. 16, 5, p. 728-735 8 p.

Research output: Contribution to journalArticle

In vivo evaluation of collagen-coated dacron fiber in bone

Suganuma, J., Pachence, J., Traub, J. A., Alexander, H., Ricci, J. I. & Casar, R. S., 1994, In : Clinical Materials. 15, 1, p. 43-50 8 p.

Research output: Contribution to journalArticle

In vivo evaluation of dual acid-etched and grit-blasted/acid-etched implants with identical macrogeometry in high-density bone

Jinno, Y., Jimbo, R., Tovar, N., Teixeira, H. S., Witek, L. & Coelho, P. G., Dec 2017, In : Implant dentistry. 26, 6, p. 815-819 5 p.

Research output: Contribution to journalArticle

In vivo evaluation of resorbable supercritical CO2-treated collagen membranes for class III furcation-guided tissue regeneration

Tovar, N., Witek, L., Neiva, R., Marão, H. F., Gil, L. F., Atria, P., Jimbo, R., Caceres, E. A. & Coelho, P. G., Jul 2019, In : Journal of Biomedical Materials Research - Part B Applied Biomaterials. 107, 5, p. 1320-1328 9 p.

Research output: Contribution to journalArticle

Issues related to mineralized tissue biology in human evolutionary research

Bromage, T. G., Apr 1991, In : Human Evolution. 6, 2, p. 165-175 11 p.

Research output: Contribution to journalArticle

Kinematic and sedimentological evolution of the Manyara Rift in northern Tanzania, East Africa

Ring, U., Schwartz, H. L., Bromage, T. G. & Sanaane, C., Jul 2005, In : Geological Magazine. 142, 4, p. 355-368 14 p.

Research output: Contribution to journalArticle

Kinetics of conversion of brushite coatings to hydroxyapatite in alkaline solution

Da Rocha, D. N., Da Silva, M. H. P., De Campos, J. B., Marçal, R. L. S. B., Mijares, D. Q., Coelho, P. G. & Cruz, L. R., 2018, In : Journal of Materials Research and Technology. 7, 4, p. 479-486 8 p.

Research output: Contribution to journalArticle

Lab-on-a-chip sensor for analysis of cellular biomarkers in oral exfoliative cytology: A new diagnostic tool for early detection of oral cancer

Weigum, S., Redding, S., Yeh, C., McGuff, H., Vigneswaran, N. & McDevitt, J., 2009, In : Oral Oncology. p. 111-111

Research output: Contribution to journalArticle