Find Research outputs

Search results

• 3D Modelling of the interaction of Pulsar Wind Nebula (PWN) with Interstellar medium

  Rahman, T., Neilsen, D., Hirschmann, E., Liebling, S. & Roberts, M., Apr 2006.

  Research output: Contribution to conference › Abstract

• 3D models of exoplanet atmospheres

  Dobbs-Dixon, I., Jul 2011, From Interacting Binaries to Exoplanets: Essential Modeling Tools. Richards, M. & Hubeny, I. (eds.). S282 ed. p. 533-538 6 p. (Proceedings of the International Astronomical Union; vol. 7, no. S282).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • extrasolar planets
  • atmospheres
  • Eastern Hemisphere
  • Western hemisphere
  • egress

• 3DMotion-net: Learning continuous flow function for 3D motion prediction

  Yuan, S., Li, X., Tzes, A. & Fang, Y., Oct 24 2020, 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2020. Institute of Electrical and Electronics Engineers Inc., p. 8154-8160 7 p. 9341671. (IEEE International Conference on Intelligent Robots and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Deep neural networks
  • Convolution
  • Flow fields
  • Experiments

• 3DMotion-Net: Learning Continuous Flow Function for 3D Motion Prediction

  Yuan, S., Li, X., Tzes, A. & Fang, Y., 2020, In: arXiv preprint arXiv:2006.13906.

  Research output: Contribution to journal › Article

• 3d multi-scale line filter for segmentation and visualization of curvilinear structures in medical images

  Sato, Y., Nakajima, S., Atsumi, H., Roller, T., Gerig, G., Yoshida, S. & Kikinis, R., 1997, CVRMed-MRCAS 1997 - 1st Joint Conference Computer Vision, Virtual Reality and Robotics in Medicine and Medical Robotics and Computer-Assisted Surgery, Proceedings. Troccaz, J., Grimson, E. & Mösges, R. (eds.). Springer Verlag, p. 213-222 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 1205).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Medical Image
  • Segmentation
  • Visualization
  • Filter
  • Line

• 3D NOC for many-core processors

  Zia, A., Kannan, S., Jonathan Chao, H. & Rose, G. S., Dec 2011, In: Microelectronics Journal. 42, 12, p. 1380-1390 11 p.

  Research output: Contribution to journal › Article › peer-review

  • central processing units
  • Network-on-chip
  • chips
  • topology
  • Topology

• 3D Numerical Simulations of f-Mode Propagation Through Magnetic Flux Tubes

  Daiffallah, K., Abdelatif, T., Bendib, A., Cameron, R. & Gizon, L., Feb 2011, In: Solar Physics. 268, 2, p. 309-320 12 p.

  Research output: Contribution to journal › Article › peer-review

  • propagation modes
  • magnetic flux
  • tubes
  • gravity wave
  • surface wave

• 3D OCT eye movement correction based on particle filtering

  Xu, J., Ishikawa, H., Wollstein, G. & Schuman, J. S., 2010, 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC'10. IEEE Computer Society, p. 53-56 4 p. 5626302. (2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC'10).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Optical tomography
  • Eye movements
  • Dynamical systems
  • Scanning
  • Imaging techniques

• 3D OCT retinal vessel segmentation based on boosting learning

  Xu, J., Tolliver, D. A., Ishikawa, H., Wollstein, G. & Schuman, J. S., 2009, World Congress on Medical Physics and Biomedical Engineering: Biomedical Engineering for Audiology, Ophthalmology, Emergency and Dental Medicine. 11 ed. Springer Verlag, p. 179-182 4 p. (IFMBE Proceedings; vol. 25, no. 11).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Blood vessels
  • Image registration
  • Image classification
  • Learning algorithms
  • Pixels

• 3D of brain shape and volume after cranial vault remodeling surgery for craniosynostosis correction in infants

  Paniagua, B., Emodi, O., Hill, J., Fishbaugh, J., Pimenta, L. A., Aylward, S. R., Andinet, E., Gerig, G., Gilmore, J., Van Aalst, J. A. & Styner, M., 2013, Medical Imaging 2013: Biomedical Applications in Molecular, Structural, and Functional Imaging. 86720V. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 8672).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Craniosynostoses
  • surgery
  • Surgery
  • brain
  • Brain

• 3D optical coherence tomography super pixel with machine classifier analysis for glaucoma detection

  Xu, J., Ishikawa, H., Wollstein, G. & Schuman, J. S., 2011, 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011. p. 3395-3398 4 p. 6090919. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Optical tomography
  • Optical Coherence Tomography
  • Glaucoma
  • Pixels
  • Classifiers

• 3D organization of synthetic and scrambled chromosomes

  Mercy, G., Mozziconacci, J., Scolari, V. F., Yang, K., Zhao, G., Thierry, A., Luo, Y., Mitchell, L. A., Shen, M., Shen, Y., Walker, R., Zhang, W., Wu, Y., Xie, Z. X., Luo, Z., Cai, Y., Dai, J., Yang, H., Yuan, Y. J., Boeke, J. D. & 3 others, Bader, J. S., Muller, H. & Koszul, R., Mar 10 2017, In: Science. 355, 6329, eaaf4597.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Chromosomes
  • Genome
  • Ribosomal DNA
  • Gene Deletion
  • Yeasts

• 3-D Parachute simulation by the immersed boundary method

  Kim, Y. & Peskin, C. S., Jun 2009, In: Computers and Fluids. 38, 6, p. 1080-1090 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Parachutes
  • Vents
  • Landing
  • Fibers

• 3D Point Cloud Denoising via Deep Neural Network Based Local Surface Estimation

  Duan, C., Chen, S. & Kovacevic, J., May 2019, 2019 IEEE International Conference on Acoustics, Speech, and Signal Processing, ICASSP 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 8553-8557 5 p. 8682812. (ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings; vol. 2019-May).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Deep neural networks
  • Neural networks
  • Deep learning
  • Experiments

• 3D Point Cloud Processing and Learning for Autonomous Driving: Impacting Map Creation, Localization, and Perception

  Chen, S., Liu, B., Feng, C., Vallespi-Gonzalez, C. & Wellington, C., Jan 2021, In: IEEE Signal Processing Magazine. 38, 1, p. 68-86 19 p., 9307334.

  Research output: Contribution to journal › Article › peer-review

  • Point Cloud
  • Autonomous Vehicles
  • Perception
  • Autonomous vehicles
  • Learning

• 3D Position Sensitive XeTPC for Dark Matter Search

  Angle, J., Aprile, E., Arneodo, F., Baudis, L., Bernstein, A., Bolozdynya, A., Coelho, L., Dahl, E., DeViveiros, L., Ferella, A., Fernandes, L., Fiorucci, S., Gaitskell, R. J., Giboni, K. L., Gomez, R., Hasty, R., Kwong, J., Lopes, J. A. M., Madden, N., Manalaysay, A. & 13 others, Manzur, A., McKinsey, D., Monzani, M. E., Ni, K., Oberlack, U., Orboeck, J., Plante, G., Santos, J., Shagin, P., Shutt, T., Sorensen, P., Winant, C. & Yamashita, M., Nov 2007, In: Nuclear Physics B - Proceedings Supplements. 173, p. 117-120 4 p.

  Research output: Contribution to journal › Article › peer-review

  • xenon
  • dark matter
  • projection
  • prototypes
  • chambers

• 3D printable magnesium oxide concrete: towards sustainable modern architecture

  Khalil, A., Wang, X. & Celik, K., May 2020, In: Additive Manufacturing. 33, 101145.

  Research output: Contribution to journal › Article › peer-review

  • Magnesium Oxide
  • Magnesia
  • Cements
  • Concretes
  • Printing

• 3D Printed 2- and 4- Aperture Microfluidic Probes

  Qasaimeh, M., Alnemari, R. & Brimmo, A. T., 2018, MMB. p. 113-114

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D printed architected heat sinks cooling performance in free and forced convection environments

  Hassan Ali, M. I., Al-Ketan, O., Khalil, M., Baobaid, N., Khan, K. & Abu Al-Rub, R. K., 2020, ASME 2020 Heat Transfer Summer Conference, HT 2020, collocated with the ASME 2020 Fluids Engineering Division Summer Meeting and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers (ASME), v001t09a012. (ASME 2020 Heat Transfer Summer Conference, HT 2020, collocated with the ASME 2020 Fluids Engineering Division Summer Meeting and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • forced convection
  • heat sinks
  • Forced convection
  • Heat sinks
  • minimal surfaces

• 3D-printed ceramic triply periodic minimal surface structures for design of functionally graded bone implants

  Vijayavenkataraman, S., Kuan, L. Y. & Lu, W. F., Jun 2020, In: Materials and Design. 191, 108602.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Surface structure
  • Bone
  • Shielding
  • Ceramic materials
  • Cell adhesion

• 3D printed feed spacers based on triply periodic minimal surfaces for flux enhancement and biofouling mitigation in RO and UF

  Sreedhar, N., Thomas, N., Al-Ketan, O., Rowshan, R., Hernandez, H., Abu Al-Rub, R. K. & Arafat, H. A., Jan 1 2018, In: Desalination. 425, p. 12-21 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Biofouling
  • Ultrafiltration
  • Reverse osmosis
  • biofouling
  • ultrafiltration

• 3DPrinted Herringbone Micromixers for Immuno-Capture of Cancer Cells

  Qasaimeh, M., Alnemari, R., Brimmo, A. T., Deliorman, M. & Sukumar, P., 2018, p. 2441-2442.

  Research output: Contribution to conference › Paper › peer-review

• 3D-printed herringbone micro-mixers for immuno-capture of cancer cells

  Sukumar, P., Deliorman, M., Brimmo, A., Alnemari, R. & Qasaimeh, M. A., Jan 1 2018, 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018. Chemical and Biological Microsystems Society, p. 2441-2442 2 p. (22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018; vol. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Cells
  • Printing
  • Epithelial Cell Adhesion Molecule
  • Antibodies
  • Molding

• 3D printed micro-electro-fluidic probe (MeFP) for single cell electroporation

  Brimmo, A., Menachery, A. & Qasaimeh, M. A., 2019, Microfluidics, BioMEMS, and Medical Microsystems XVII. Gray, B. L. & Becker, H. (eds.). SPIE, 108751G. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 10875).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Electroporation
  • fluidics
  • Fluidics
  • Confined flow
  • probes

• 3D Printed Microfluidic Probes

  Brimmo, A., Goyette, P. A., Alnemari, R., Gervais, T. & Qasaimeh, M. A., Dec 1 2018, In: Scientific reports. 8, 1, 10995.

  Research output: Contribution to journal › Article › peer-review

  • Microfluidics
  • Stereolithography
  • Microtechnology
  • Silicon
  • Glass

• 3D printed multipurpose atomic force microscopy probes

  Glia, A., Deliorman, M. & Qasaimeh, M. A., 2020, MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences. Chemical and Biological Microsystems Society, p. 322-323 2 p. (MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Atomic force microscopy
  • Scanning probe microscopy
  • Silicon
  • Photons
  • Polymerization

• 3D-Printed PCL/PPy Conductive Scaffolds as Three-Dimensional Porous Nerve Guide Conduits (NGCs) for Peripheral Nerve Injury Repair

  Vijayavenkataraman, S., Kannan, S., Cao, T., Fuh, J. Y. H., Sriram, G. & Lu, W. F., Oct 16 2019, In: Frontiers in Bioengineering and Biotechnology. 7, 266.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • polypyrrole
  • Polypyrroles
  • Peripheral Nerve Injuries
  • Scaffolds
  • Repair

• 3D-Printed PCL/rGO Conductive Scaffolds for Peripheral Nerve Injury Repair

  Vijayavenkataraman, S., Thaharah, S., Zhang, S., Lu, W. F. & Fuh, J. Y. H., May 2019, In: Artificial Organs. 43, 5, p. 515-523 9 p.

  Research output: Contribution to journal › Article › peer-review

  • graphene oxide
  • Graphene oxide
  • Peripheral Nerve Injuries
  • Scaffolds
  • Repair

• 3D printed renal cancer models derived from MRI data: application in pre-surgical planning

  Wake, N., Rude, T., Kang, S. K., Stifelman, M. D., Borin, J. F., Sodickson, D. K., Huang, W. C. & Chandarana, H., May 1 2017, In: Abdominal Radiology. 42, 5, p. 1501-1509 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Kidney Neoplasms
  • Surgeons
  • Kidney
  • Operative Surgical Procedures
  • Research Ethics Committees

• 3D printed spacers based on TPMS architectures for scaling control in membrane distillation

  Thomas, N., Sreedhar, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K. & Arafat, H., Jul 1 2019, In: Journal of Membrane Science. 581, p. 38-49 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Distillation
  • minimal surfaces
  • distillation
  • spacers
  • Calcium Sulfate

• 3D printed spacers for organic fouling mitigation in membrane distillation

  Castillo, E. H. C., Thomas, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K., Nghiem, L. D., Vigneswaran, S., Arafat, H. A. & Naidu, G., Jul 1 2019, In: Journal of Membrane Science. 581, p. 331-343 13 p.

  Research output: Contribution to journal › Article › peer-review

  • Distillation
  • fouling
  • distillation
  • Fouling
  • spacers

• 3D printed triply periodic minimal surfaces as spacers for enhanced heat and mass transfer in membrane distillation

  Thomas, N., Sreedhar, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K. & Arafat, H., Oct 1 2018, In: Desalination. 443, p. 256-271 16 p.

  Research output: Contribution to journal › Article › peer-review

  • distillation
  • Distillation
  • Mass transfer
  • heat transfer
  • mass transfer

• 3D printing: On its historical evolution and the implications for business

  Matias, E. & Rao, B., Sep 21 2015, PICMET 2015 - Portland International Center for Management of Engineering and Technology: Management of the Technology Age, Proceedings. Daim, T. U., Kozanoglu, D. C., Kocaoglu, D. F., Anderson, T. R., Perman, G. & Niwa, K. (eds.). Portland State University, p. 551-558 8 p. 7273052. (Portland International Conference on Management of Engineering and Technology; vol. 2015-September).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Printing
  • 3D printers
  • Manufacturing Technology
  • Industry
  • Business Markets

• 3D printing and 3D bioprinting in pediatrics

  Vijayavenkataraman, S., Fuh, J. Y. H. & Lu, W. F., Sep 2017, In: Bioengineering. 4, 3, 63.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

  • Pediatrics
  • Printing
  • Regenerative Medicine
  • Tissue engineering
  • Ink

• 3D-Printing Crystallographic Unit Cells for Learning Materials Science and Engineering

  Rodenbough, P. P., Vanti, W. B. & Chan, S-W., 2015, In: Journal of Chemical Education.

  Research output: Contribution to journal › Article › peer-review

• 3D Printing of Microgel-Loaded Modular Microcages as Instructive Scaffolds for Tissue Engineering

  Subbiah, R., Hipfinger, C., Tahayeri, A., Athirasala, A., Horsophonphong, S., Thrivikraman, G., França, C. M., Cunha, D. A., Mansoorifar, A., Zahariev, A., Jones, J. M., Coelho, P. G., Witek, L., Xie, H., Guldberg, R. E. & Bertassoni, L. E., Sep 1 2020, In: Advanced Materials. 32, 36, 2001736.

  Research output: Contribution to journal › Article › peer-review

  • Tissue engineering
  • Scaffolds
  • Printing
  • Regenerative Medicine
  • Scalability

• 3D quantum scattering calculations of the reaction He + H⁺₂ → HeH⁺ + H for total angular momentum J = 0

  Zhang, J. Z. H., Yeager, D. L. & Miller, W. H., Oct 19 1990, In: Chemical Physics Letters. 173, 5-6, p. 489-495 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Angular momentum
  • Scattering
  • angular momentum
  • scattering
  • Surface potential

• 3D reconstruction of rough terrain for USARSim using a height-map method

  Roberts, G., Balakirsky, S. & Foufou, S., 2008, Performance Metrics for Intelligent Systems (PerMIS) Workshop - Proceedings of the PerMIS'08 Workshop. p. 259-264 6 p. (Performance Metrics for Intelligent Systems (PerMIS) Workshop).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Automation
  • Robots
  • Physics
  • Lasers

• 3D Reconstructions Using Unstabilised Video Footage from an Unmanned Aerial System

  Byrne, J., O’Keeffe, E., Lennon, D. & Laefer, D., 2017, In: Journal of Imaging. 3, 2, p. 15

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 3D reconstructions using unstabilized video footage from an unmanned aerial vehicle

  Byrne, J., O'Keeffe, E., Lennon, D. & Laefer, D. F., Jun 2017, In: Journal of Imaging. 3, 2, 3020015.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Unmanned aerial vehicles (UAV)
  • Costs and Cost Analysis
  • Photogrammetry
  • Antennas
  • Costs

• 3D Registration of mpMRI for Assessment of Prostate Cancer Focal Therapy

  Orczyk, C., Rosenkrantz, A. B., Mikheev, A., Villers, A., Bernaudin, M., Taneja, S. S., Valable, S. & Rusinek, H., Dec 2017, In: Academic Radiology. 24, 12, p. 1544-1555 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Prostatic Neoplasms
  • Magnetic Resonance Imaging
  • Prostate
  • Therapeutics
  • Software

• 3D simulations of the early stages of AGN jets: Geometry, thermodynamics and backflow

  Cielo, S., Antonuccio-Delogu, V., Macciò, A. V., Romeo, A. D. & Silk, J., Apr 2014, In: Monthly Notices of the Royal Astronomical Society. 439, 3, p. 2903-2916 14 p.

  Research output: Contribution to journal › Article › peer-review

  • active galactic nuclei
  • thermodynamics
  • cocoon
  • geometry
  • accretion

• 3D spin-orbit angle of Kepler-25 and HAT-P-7

  Benomar, O., Masuda, K., Shibahashi, H. & Suto, Y., Sep 23 2015, In: EPJ Web of Conferences. 101, 02007.

  Research output: Contribution to journal › Conference article › peer-review

  • planets
  • orbits
  • asteroseismology
  • stars
  • stellar systems

• 3-D statistical channel model for millimeter-wave outdoor mobile broadband communications

  Samimi, M. K. & Rappaport, T., 2015, 2015 IEEE International Conference on Communications (ICC), June 8-12, 2015.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3-D Statistical Indoor Channel Model for Millimeter-Wave and Sub-Terahertz Bands

  Ju, S., Xing, Y., Kanhere, O. & Rappaport, T. S., Dec 2020, 2020 IEEE Global Communications Conference, GLOBECOM 2020 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 9322429. (2020 IEEE Global Communications Conference, GLOBECOM 2020 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Millimeter Wave
  • Channel Model
  • 3D
  • Millimeter waves
  • millimeter waves

• 3d surface rendered mr images of the brain and its vasculature

  Cline, H. E., Lorensen, W. E., Souza, S. P., Jolesz, F. A., Kikinis, R., Gerig, G. & Kennedy, T. E., Mar 1991, In: Journal of Computer Assisted Tomography. 15, 2, p. 344-351 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Magnetic Resonance Angiography
  • Brain
  • Blood Vessels

• 3D tensor normalization for improved accuracy in DTI tensor registration methods

  Gupta, A., Escolar, M., Dietrich, C., Gilmore, J., Gerig, G. & Styner, M., 2012, Biomedical Image Registration - 5th International Workshop, WBIR 2012, Proceedings. p. 170-179 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 7359 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Registration
  • Tensors
  • Normalization
  • Tensor
  • Template

• 3D video coding for embedded devices: Energy efficient algorithms and architectures

  Zatt, B., Shafique, M., Bampi, S. & Henkel, J., Jul 1 2013, Springer New York. 204 p.

  Research output: Book/Report › Book

  • Image coding
  • Energy utilization
  • Computer hardware
  • Computational complexity

• 3D visualization of aqueous humor outflow structures in-situ in humans

  Kagemann, L., Wollstein, G., Ishikawa, H., Sigal, I. A., Folio, L. S., Xu, J., Gong, H. & Schuman, J. S., Sep 2011, In: Experimental Eye Research. 93, 3, p. 308-315 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Aqueous Humor
  • Veins
  • Eye
  • Perfusion
  • Trabecular Meshwork

• 3D welding and milling: Part I-a direct approach for freeform fabrication of metallic prototypes

  Song, Y. A., Park, S., Choi, D. & Jee, H., Jul 2005, In: International Journal of Machine Tools and Manufacture. 45, 9, p. 1057-1062 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Layered manufacturing
  • Gas metal arc welding
  • Welding
  • Fabrication
  • Machining