Search concepts
|
Selected Filters
|
- 300 - 350 out of 126,914 results
Search results
-
3D Morphology of Open Clusters in the Solar Neighborhood with Gaia EDR 3: Its Relation to Cluster Dynamics
Pang, X., Li, Y., Yu, Z., Tang, S. Y., Dinnbier, F., Kroupa, P., Pasquato, M. & Kouwenhoven, M. B. N., May 10 2021, In: Astrophysical Journal. 912, 2, abeaac.Research output: Contribution to journal › Article › peer-review
-
3DMotion-net: Learning continuous flow function for 3D motion prediction
Yuan, S., Li, X., Tzes, A. & Fang, Y., Oct 24 2020, 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2020. Institute of Electrical and Electronics Engineers Inc., p. 8154-8160 7 p. 9341671. (IEEE International Conference on Intelligent Robots and Systems).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3d multi-scale line filter for segmentation and visualization of curvilinear structures in medical images
Sato, Y., Nakajima, S., Atsumi, H., Roller, T., Gerig, G., Yoshida, S. & Kikinis, R., 1997, CVRMed-MRCAS 1997 - 1st Joint Conference Computer Vision, Virtual Reality and Robotics in Medicine and Medical Robotics and Computer-Assisted Surgery, Proceedings. Troccaz, J., Grimson, E. & Mösges, R. (eds.). Springer Verlag, p. 213-222 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 1205).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D navigation and collision avoidance for a non-holonomic vehicle
Roussos, G. P., Dimarogonas, D. V. & Kyriakopoulos, K. J., 2008, 2008 American Control Conference, ACC. p. 3512-3517 6 p. 4587037. (Proceedings of the American Control Conference).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D navigation and collision avoidance for nonholonomic aircraft-like vehicles
Roussos, G., Dimarogonas, D. V. & Kyriakopoulos, K. J., Oct 2010, In: International Journal of Adaptive Control and Signal Processing. 24, 10, p. 900-920 21 p.Research output: Contribution to journal › Article › peer-review
-
3D NOC for many-core processors
Zia, A., Kannan, S., Jonathan Chao, H. & Rose, G. S., Dec 2011, In: Microelectronics Journal. 42, 12, p. 1380-1390 11 p.Research output: Contribution to journal › Article › peer-review
-
3D Numerical Simulations of f-Mode Propagation Through Magnetic Flux Tubes
Daiffallah, K., Abdelatif, T., Bendib, A., Cameron, R. & Gizon, L., Feb 2011, In: Solar Physics. 268, 2, p. 309-320 12 p.Research output: Contribution to journal › Article › peer-review
-
3D OCT eye movement correction based on particle filtering
Xu, J., Ishikawa, H., Wollstein, G. & Schuman, J. S., 2010, 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC'10. IEEE Computer Society, p. 53-56 4 p. 5626302. (2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC'10).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D OCT retinal vessel segmentation based on boosting learning
Xu, J., Tolliver, D. A., Ishikawa, H., Wollstein, G. & Schuman, J. S., 2009, World Congress on Medical Physics and Biomedical Engineering: Biomedical Engineering for Audiology, Ophthalmology, Emergency and Dental Medicine. 11 ed. Springer Verlag, p. 179-182 4 p. (IFMBE Proceedings; vol. 25, no. 11).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D of brain shape and volume after cranial vault remodeling surgery for craniosynostosis correction in infants
Paniagua, B., Emodi, O., Hill, J., Fishbaugh, J., Pimenta, L. A., Aylward, S. R., Andinet, E., Gerig, G., Gilmore, J., Van Aalst, J. A. & Styner, M., 2013, Medical Imaging 2013: Biomedical Applications in Molecular, Structural, and Functional Imaging. 86720V. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 8672).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D optical coherence tomography super pixel with machine classifier analysis for glaucoma detection
Xu, J., Ishikawa, H., Wollstein, G. & Schuman, J. S., 2011, 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2011. p. 3395-3398 4 p. 6090919. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D organization of synthetic and scrambled chromosomes
Mercy, G., Mozziconacci, J., Scolari, V. F., Yang, K., Zhao, G., Thierry, A., Luo, Y., Mitchell, L. A., Shen, M., Shen, Y., Walker, R., Zhang, W., Wu, Y., Xie, Z. X., Luo, Z., Cai, Y., Dai, J., Yang, H., Yuan, Y. J., Boeke, J. D., & 3 others , Mar 10 2017, In: Science. 355, 6329, eaaf4597.Research output: Contribution to journal › Article › peer-review
-
3-D Parachute simulation by the immersed boundary method
Kim, Y. & Peskin, C. S., Jun 2009, In: Computers and Fluids. 38, 6, p. 1080-1090 11 p.Research output: Contribution to journal › Article › peer-review
-
3D Parametric Wireframe Extraction Based on Distance Fields
Matveev, A., Artemov, A., Zorin, D. & Burnaev, E., Sep 24 2021, AIPR 2021 - 2021 4th International Conference on Artificial Intelligence and Pattern Recognition. Association for Computing Machinery, p. 316-322 7 p. (ACM International Conference Proceeding Series).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D Point Cloud Completion with Geometric-Aware Adversarial Augmentation
Wu, M., Huang, H. & Fang, Y., 2022, 2022 26th International Conference on Pattern Recognition, ICPR 2022. Institute of Electrical and Electronics Engineers Inc., p. 4001-4007 7 p. (Proceedings - International Conference on Pattern Recognition; vol. 2022-August).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D Point Cloud Denoising via Deep Neural Network Based Local Surface Estimation
Duan, C., Chen, S. & Kovacevic, J., May 2019, 2019 IEEE International Conference on Acoustics, Speech, and Signal Processing, ICASSP 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 8553-8557 5 p. 8682812. (ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings; vol. 2019-May).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D Point Cloud Processing and Learning for Autonomous Driving: Impacting Map Creation, Localization, and Perception
Chen, S., Liu, B., Feng, C., Vallespi-Gonzalez, C. & Wellington, C., Jan 2021, In: IEEE Signal Processing Magazine. 38, 1, p. 68-86 19 p., 9307334.Research output: Contribution to journal › Article › peer-review
-
3D Position Sensitive XeTPC for Dark Matter Search
Angle, J., Aprile, E., Arneodo, F., Baudis, L., Bernstein, A., Bolozdynya, A., Coelho, L., Dahl, E., DeViveiros, L., Ferella, A., Fernandes, L., Fiorucci, S., Gaitskell, R. J., Giboni, K. L., Gomez, R., Hasty, R., Kwong, J., Lopes, J. A. M., Madden, N., Manalaysay, A., & 13 others , Nov 2007, In: Nuclear Physics B - Proceedings Supplements. 173, p. 117-120 4 p.Research output: Contribution to journal › Article › peer-review
-
3D printable bone-mimicking functionally gradient stochastic scaffolds for tissue engineering and bone implant applications
Kanwar, S. & Vijayavenkataraman, S., Nov 2022, In: Materials and Design. 223, 111199.Research output: Contribution to journal › Article › peer-review
Open Access -
3D-printable conductive materials for tissue engineering and biomedical applications
Zhou, J. & Vijayavenkataraman, S., Dec 2021, In: Bioprinting. 24, e00166.Research output: Contribution to journal › Review article › peer-review
-
3D printable magnesium oxide concrete: towards sustainable modern architecture
Khalil, A., Wang, X. & Celik, K., May 2020, In: Additive Manufacturing. 33, 101145.Research output: Contribution to journal › Article › peer-review
-
3D Printed 2- and 4- Aperture Microfluidic Probes
Qasaimeh, M., Alnemari, R. & Brimmo, A. T., 2018, MMB. p. 113-114Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D printed architected heat sinks cooling performance in free and forced convection environments
Hassan Ali, M. I., Al-Ketan, O., Khalil, M., Baobaid, N., Khan, K. & Abu Al-Rub, R. K., 2020, ASME 2020 Heat Transfer Summer Conference, HT 2020, collocated with the ASME 2020 Fluids Engineering Division Summer Meeting and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers (ASME), v001t09a012. (ASME 2020 Heat Transfer Summer Conference, HT 2020, collocated with the ASME 2020 Fluids Engineering Division Summer Meeting and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D-printed ceramic triply periodic minimal surface structures for design of functionally graded bone implants
Vijayavenkataraman, S., Kuan, L. Y. & Lu, W. F., Jun 2020, In: Materials and Design. 191, 108602.Research output: Contribution to journal › Article › peer-review
Open Access -
3D printed electrically conductive interdigitated spacer on ultrafiltration membrane for electrolytic cleaning and chlorination
Khalil, A., Ahmed, F. E., Hashaikeh, R. & Hilal, N., Jun 15 2022, In: Journal of Applied Polymer Science. 139, 23, 52292.Research output: Contribution to journal › Article › peer-review
-
3D printed feed spacers based on triply periodic minimal surfaces for flux enhancement and biofouling mitigation in RO and UF
Sreedhar, N., Thomas, N., Al-Ketan, O., Rowshan, R., Hernandez, H., Abu Al-Rub, R. K. & Arafat, H. A., Jan 1 2018, In: Desalination. 425, p. 12-21 10 p.Research output: Contribution to journal › Article › peer-review
-
3DPrinted Herringbone Micromixers for Immuno-Capture of Cancer Cells
Qasaimeh, M., Alnemari, R., Brimmo, A. T., Deliorman, M. & Sukumar, P., 2018, p. 2441-2442.Research output: Contribution to conference › Paper › peer-review
-
3D-printed herringbone micro-mixers for immuno-capture of cancer cells
Sukumar, P., Deliorman, M., Brimmo, A., Alnemari, R. & Qasaimeh, M. A., Jan 1 2018, 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018. Chemical and Biological Microsystems Society, p. 2441-2442 2 p. (22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018; vol. 4).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D printed membrane-integrated spacers for enhanced antifouling in ultrafiltration
Khalil, A., Francis, L., Hashaikeh, R. & Hilal, N., Nov 10 2022, In: Journal of Applied Polymer Science. 139, 42, e53019.Research output: Contribution to journal › Article › peer-review
-
3D printed micro-electro-fluidic probe (MeFP) for single cell electroporation
Brimmo, A., Menachery, A. & Qasaimeh, M. A., 2019, Microfluidics, BioMEMS, and Medical Microsystems XVII. Gray, B. L. & Becker, H. (eds.). SPIE, 108751G. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 10875).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D Printed Microfluidic Probes
Brimmo, A., Goyette, P. A., Alnemari, R., Gervais, T. & Qasaimeh, M. A., Dec 1 2018, In: Scientific reports. 8, 1, 10995.Research output: Contribution to journal › Article › peer-review
Open Access -
3D printed multipurpose atomic force microscopy probes
Glia, A., Deliorman, M. & Qasaimeh, M. A., 2020, MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences. Chemical and Biological Microsystems Society, p. 322-323 2 p. (MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D-Printed PCL/PPy Conductive Scaffolds as Three-Dimensional Porous Nerve Guide Conduits (NGCs) for Peripheral Nerve Injury Repair
Vijayavenkataraman, S., Kannan, S., Cao, T., Fuh, J. Y. H., Sriram, G. & Lu, W. F., Oct 16 2019, In: Frontiers in Bioengineering and Biotechnology. 7, 266.Research output: Contribution to journal › Article › peer-review
Open Access -
3D-Printed PCL/rGO Conductive Scaffolds for Peripheral Nerve Injury Repair
Vijayavenkataraman, S., Thaharah, S., Zhang, S., Lu, W. F. & Fuh, J. Y. H., May 2019, In: Artificial Organs. 43, 5, p. 515-523 9 p.Research output: Contribution to journal › Article › peer-review
-
3D printed renal cancer models derived from MRI data: application in pre-surgical planning
Wake, N., Rude, T., Kang, S. K., Stifelman, M. D., Borin, J. F., Sodickson, D. K., Huang, W. C. & Chandarana, H., May 1 2017, In: Abdominal Radiology. 42, 5, p. 1501-1509 9 p.Research output: Contribution to journal › Article › peer-review
-
3D-printed resins for provisional dental restorations: Comparison of mechanical and biological properties
Atria, P. J., Bordin, D., Marti, F., Nayak, V. V., Conejo, J., Benalcázar Jalkh, E., Witek, L. & Sampaio, C. S., Jul 2022, In: Journal of Esthetic and Restorative Dentistry. 34, 5, p. 804-815 12 p.Research output: Contribution to journal › Article › peer-review
-
3D printed spacers based on TPMS architectures for scaling control in membrane distillation
Thomas, N., Sreedhar, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K. & Arafat, H., Jul 1 2019, In: Journal of Membrane Science. 581, p. 38-49 12 p.Research output: Contribution to journal › Article › peer-review
-
3D printed spacers for organic fouling mitigation in membrane distillation
Castillo, E. H. C., Thomas, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K., Nghiem, L. D., Vigneswaran, S., Arafat, H. A. & Naidu, G., Jul 1 2019, In: Journal of Membrane Science. 581, p. 331-343 13 p.Research output: Contribution to journal › Article › peer-review
-
3D printed triply periodic minimal surfaces as spacers for enhanced heat and mass transfer in membrane distillation
Thomas, N., Sreedhar, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K. & Arafat, H., Oct 1 2018, In: Desalination. 443, p. 256-271 16 p.Research output: Contribution to journal › Article › peer-review
-
3D printed zeolite-Y for removing heavy metals from water
Khalil, A., Hashaikeh, R. & Hilal, N., Aug 2021, In: Journal of Water Process Engineering. 42, 102187.Research output: Contribution to journal › Article › peer-review
-
3D printing: On its historical evolution and the implications for business
Matias, E. & Rao, B., Sep 21 2015, PICMET 2015 - Portland International Center for Management of Engineering and Technology: Management of the Technology Age, Proceedings. Daim, T. U., Kozanoglu, D. C., Kocaoglu, D. F., Anderson, T. R., Perman, G. & Niwa, K. (eds.). Portland State University, p. 551-558 8 p. 7273052. (Portland International Conference on Management of Engineering and Technology; vol. 2015-September).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D printing and 3D bioprinting in pediatrics
Vijayavenkataraman, S., Fuh, J. Y. H. & Lu, W. F., Sep 2017, In: Bioengineering. 4, 3, 63.Research output: Contribution to journal › Review article › peer-review
Open Access -
3D-Printing Crystallographic Unit Cells for Learning Materials Science and Engineering
Rodenbough, P. P., Vanti, W. B. & Chan, S-W., 2015, In: Journal of Chemical Education.Research output: Contribution to journal › Article › peer-review
-
3D printing of complex architected metamaterial structures by simple material extrusion for bone tissue engineering
Hashimi, N. S. A., Soman, S. S., Govindharaj, M. & Vijayavenkataraman, S., Jun 2022, In: Materials Today Communications. 31, 103382.Research output: Contribution to journal › Article › peer-review
-
3D printing of fly ash-based syntactic foams
Doddamani, M. & Gupta, N., Jan 1 2021, Handbook of Fly Ash. Elsevier, p. 793-818 26 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter
-
3D Printing of Microgel-Loaded Modular Microcages as Instructive Scaffolds for Tissue Engineering
Subbiah, R., Hipfinger, C., Tahayeri, A., Athirasala, A., Horsophonphong, S., Thrivikraman, G., França, C. M., Cunha, D. A., Mansoorifar, A., Zahariev, A., Jones, J. M., Coelho, P. G., Witek, L., Xie, H., Guldberg, R. E. & Bertassoni, L. E., Sep 1 2020, In: Advanced Materials. 32, 36, 2001736.Research output: Contribution to journal › Article › peer-review
-
3D quantum scattering calculations of the reaction He + H+2 → HeH+ + H for total angular momentum J = 0
Zhang, J. Z. H., Yeager, D. L. & Miller, W. H., Oct 19 1990, In: Chemical Physics Letters. 173, 5-6, p. 489-495 7 p.Research output: Contribution to journal › Article › peer-review
-
3D reconstruction of rough terrain for USARSim using a height-map method
Roberts, G., Balakirsky, S. & Foufou, S., 2008, Performance Metrics for Intelligent Systems (PerMIS) Workshop - Proceedings of the PerMIS'08 Workshop. p. 259-264 6 p. (Performance Metrics for Intelligent Systems (PerMIS) Workshop).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
3D reconstructions using unstabilized video footage from an unmanned aerial vehicle
Byrne, J., O'Keeffe, E., Lennon, D. & Laefer, D. F., Jun 2017, In: Journal of Imaging. 3, 2, 3020015.Research output: Contribution to journal › Article › peer-review
Open Access -
3D Registration of mpMRI for Assessment of Prostate Cancer Focal Therapy
Orczyk, C., Rosenkrantz, A. B., Mikheev, A., Villers, A., Bernaudin, M., Taneja, S. S., Valable, S. & Rusinek, H., Dec 2017, In: Academic Radiology. 24, 12, p. 1544-1555 12 p.Research output: Contribution to journal › Article › peer-review