Abstract
—A miniaturized, fully integrated wireless power receiver system-on-chip with embedded 16-channel electrode array and data transceiver for electrocortical neural recording and stimulation is presented. An H-tree power and signal distribution network throughout the SoC maintains high quality factor up to 11 in the on-chip receiver coil at 144 MHz resonant frequency while rejecting RF interference in sensitive neural interface circuits owing to its perpendicular and equidistant geometry. A multi-mode buck-boost resonant regulating rectifier (B2R3) offers greater than 11-dB input dynamic range in RF reception and less than 1 mV overshoot in transient load regulation. At 10 mm link distance, the 9 mm2 neural interface SoC fabricated in a 180 nm silicon-on-insulator (SOI) process attains an overall wireless power transmission system efficiency (WSE) of 3.4% in driving a 160 µW load yielding a WSE figure-of-merit of 131, while maintaining signal integrity in analog recording and wireless data transmission that comprise the on-chip load.
Original language | English (US) |
---|---|
Pages (from-to) | 1736-1746 |
Number of pages | 11 |
Journal | IEEE Transactions on Biomedical Circuits and Systems |
Volume | 13 |
Issue number | 6 |
DOIs | |
State | Published - Dec 1 2019 |
Keywords
- Adaptive mode switching
- H-tree distribution
- brain-computer interface (BCI)
- electrocorticography (ECoG)
- mm-sized implant
- on-chip coil
- regulating rectifier
- wireless power transmission (WPT)
ASJC Scopus subject areas
- Biomedical Engineering
- Electrical and Electronic Engineering